EMEROX® 1110 is an azelaic acid derived from natural, renewable sources. EMEROX 1110 improves flexibility and provides derivatives with lower melting points than derivatives based on even-carbon acids while also providing good solubility characteristics.
EMEROX® 1185 is a mixture of C9 and C11 linear dicarboxylic acids derived from natural, renewable sources. EMEROX 1185 can be used for corrosion inhibition for metalworking fluids and coolants; complexing agent for Lubricantss and lubricant base stocks.
EMEROX 1199® is a dibasic acid mixture that provides excellent ferrous metal corrosion protection when formulated as an amine salt into water-based metalworking fluids, cleaners, hydraulic fluids and engine coolants.
EMEROX® 1144 is an azelaic acid used as a base product for high-performance greases and esters.
EMERSOL™ 132NF Stearic Acid, triple-pressed, has an extremely low impurity content and low iodine value making it the purest commercial macrocrystalline stearic acid available. EMERSOL 132NF Stearic Acid is the prime choice for the highest quality end products because of its outstanding color stability, resistance to rancidity, low odor and unmatched oxidation stability.
EMERSOL™ 153 Stearic Acid NF contains the highest content of stearic acid in the Emery Oleochemical product portfolio, typically 96%. EMERSOL 153 Stearic Acid NF has high purity with excellent initial color, low iodine value and excellent color stability.
EMERSOL™ 213 Oleic Acid NF is a somewhat light colored, single-distilled oleic acid acting as a multipurpose grade for use where extremely light color is not essential. Although EMERSOL 213 Oleic Acid NF is a single-distilled grade, it posses excellent resistant to rancidity, oxidation and color changes during processing. Its low titer further increases its utility.
EMERSOL™ 221 Oleic Acid NF is a versatile oleic acid where a light color is required. This double-distilled oleic acid offers excellent color stability as well as light initial color. EMERSOL 221 Oleic Acid NF's low solid acid content and low titer result in low melting derivatives which contributes to ease of handling under low-temperature storage conditions. Products made from EMERSOL 221 Oleic Acid NF exhibit excellent resistance to rancidity and oxidation.
EMERSOL™ 233LL is a tallow oleic acid with low linoleic acid content. EMERSOL 233LL has extremely high oxidation stability and resistance to rancidity which provides finished products maximum protection against breakdown during both processing and storage before use.
EMERSOL™ 3875, isostearic acid, is a fully saturated, branched C18 monocarboxylic acid. EMERSOL 3875 is made from natural, renewable sources.
EMERSOL™ 7036 is a vegetable stearic acid that is NF and Food Grade as well as Kosher Certified.
EMERSOL™ 7043 is a palmitic acid that is Kosher grade. EMERSOL 7043 is also free of chick edema factor.
EMERY® 1202 is a pelargonic acid which is a linear C9 monocarboxylic acid derived from natural, renewable sources. Pelargonic acid is used extensively in the manufacture of synthetic lubricants with low-temperature capabilities. The performance of EMERY 1202 has been especially outstanding in high-bake alkyds where hardness, nonyellowing and flexibility properties show substantial improvement.
EMERY® 1203 is a high purity, pelargonic acid which is a synthetic C9 monocarboxylic acid. Pelargonic acid derives unique performance characteristics from its odd-carbon chain length, providing definite advantages in many quality and performance-sensitive applications over short-chain fatty acids. EMERY 1203 is readily soluble in most organic solvents.
EMERY® 1210 is a low molecular weight, pelargonic acid. EMERY 1210 is a mixture of linear C6, C7, C8 and C9 monocarboxylic acids derived from natural, renewable sources. EMERY 1210 is commonly used in lubricant basestocks, corrosion inhibitors and metal cleaners.
EMERY® 2016 is a C36 dimer acid derived from natural, renewable sources (tallow oleic acid).
EMERY® 400 is a rubber grade, stearic acid. EMERY 400 is utilized in applications where odor, color and color stability are not of primary importance. Emery 400 provides uniform quality and dependable performance at low cost. Its principal use is the manufacture of rubber, buffing compounds and greases.
EMERY® 420 is very similar to Emery 410, but has lighter color, lower iodine value and a slightly higher stearic : palmitic ratio (70:30). EMERY 420 finds use in metallic soaps and stearates, as well as in the preparation of textile specialties requiring good sulfuric acid heat stability during manufacture.
EMERY® 422 is a stearic acid. The stearic : palmitic ratio of EMERY 422 results in a combination of physical properties unobtainable from stearic acids of any other composition. It offers high hardness, low shrinkage and low titer, all of which are particularly useful in the manufacture of many molded products. EMERY 422 also possesses light initial color, good heat and color stability, low iodine value and low odor.
EMERY® 610, soya fatty acid, has approximately 53% polyunsaturated acid content and a saturated acid content of approximately 21%.
EMERY® 622, coconut fatty acid, has been specially refined to offer excellent initial color. EMERY 622 is manufactured for applications requiring a lower-cast, short-chain fatty acid.
EMERY® 626 coconut fatty acid exhibits greatly improved color stability as a direct result of the lower iodine value.
EMERY® 629, stripped coconut fatty acid, has been specially distilled to reduce the low molecular weight C8-C10 portion of the acid mixture found in "normal" coconut fatty acids from approximately 13% to 1%.
EMERY® 652 is a 99% lauric acid. EMERY 652 exhibits light initial color, excellent color stability and low iodine value.
EMERY® 657 is a commercially pure Caprylic Acid. This product is a water-white liquid containing approximately 99% caprylic acid.
EMERY® 658, caprylic-capric acid, is a blend of caprylic and capric acids that exhibit a titer considerably lower than either of the two pure acids alone. With a maximum iodine value of 0. and an initial color of 88/97 (%transmission, 440/550 nm), Emery 658 reflects the same high quality apparent in each of Emery even-carbon acids.